Setting up PiFace Control And Display Radio

Difficulty: medium

How to setup the PiFace Radio example to play internet radio through speakers or headphones, and control it with PiFace Control And Display.

Troubleshooting sound

Sound not working for your project? Try the solutions below

  • Check your Raspberry Pi can play sounds. Play a sample sound by typing in a Terminal: aplay /usr/share/scratch/Media/Sounds/Vocals/Singer1.wav
  • If you are using HDMI and no sound is being played, you may need to tell the Raspberry Pi to output sound through the audio connector. Run the following command in a Terminal. amixer -c 0 cset numid=3 1
  • Make sure your speakers or headphones are plugged into the 3.5 audio jack and are turned on